Calla® 1452

Return To Calla^® Webpage

Description

Calla^® 1452 meets the requirements of AMS 1452, AMS 1530, AMS 1453, AMS 1550, Boeing D6-7127, and D6-17487. The Calla^® 1452 Neutral Disinfectant Cleaner is a phosphate-free formulation that is designed to provide effective cleaning, deodorizing, and disinfecting. This product, when used as directed, is formulated to disinfect hard, non-porous, and inanimate environmental surfaces. These surfaces include glazed ceramic tile, plastic surfaces, floors, walls, metal surfaces, stainless steel surfaces, and glazed porcelain. Calla^® 1452 does not stain aircraft interiors and plastics. Calla^® 1452 is included on the US EPA’s List N of Products with Emerging Viral Pathogens and Human Coronavirus claims for use against SARS-CoV-2.

Application of Product

Disinfection – To disinfect inanimate, hard, and non-porous surfaces, add 4 ounces of this product per 1 gallon of water. Apply solution with a mop, cloth, sponge, hand pump trigger sprayer, or low pressure coarse sprayer. That way, all of the surfaces can be thoroughly coated with water. Allow the surfaces to remain wet for 10 minutes.

Mildewstat - To control mold and mildew (such as Aspergillus niger) including the odors they create on pre-cleaned, hard, and non-porous inanimate surfaces, add 4 ounces of this product per 1 gallon of water. Apply the solution with a cloth, mop, sponge, or hand pump trigger sprayer. Make sure all of the surfaces are completely covered in water. Allow the surfaces to air dry after covering them with water. Prepare a fresh solution for each use. Repeat application at weekly intervals or when mildew growth appears.

Fungicidal Activity – At the 4 ounces per dilution level, this product is fungicidal against the pathogenic fungi Trichophyton Mentagrophytes and Candida Albicans. Apply solution with a cloth, sponge, or hand pump trigger sprayer to hard and non-porous surfaces. Allow the surface to remain wet for 10 minutes. Remove the excess liquid after 10 minutes. The diluted product should be applied daily or more frequently if it is used heavily in a facility.