Return To Calla® Webpage
Kit With 2 Large Clear Bottles, 1 Small Bottle, and 1 Box On The Left

Description

The Calla® 602 LF Indicator Test Kit is to be used to check the concentration of the Calla® 602 LF parts washer soap that was taken from a parts washer reservoir. This kit shows a color change between the test sample and the control bottle if soap needs to be added to the parts washer solution.

 

Kit Contains

The Calla® 602 LF Indicator Test Kit contains the following items:

  • 2 Clear Bottles-One bottle for the test solution and one bottle for the control to compare and contrast those items.
  • 1 bottle of Indicator Solution
  • 1 bottle of Sodium Hydroxide Solution

 

Instructions

Instructions for how to use the Calla® 602 LF Indicator Test Kit are listed as follows.

  1. Retrieve a sample of the recently circulated wash water that contains Calla® 602 LF.
  2. Fill both clear bottles with the wash water.
  3. Set aside the bottle marked Control Sample.
  4. Pour bottle of Indicator Solution into the Test Sample bottle.
  5. Pour Sodium Hydroxide Solution into the Test Sample bottle.
  6. Shake the Test Sample bottle until well mixed.
  7. Compare the Test Sample bottle with the Control Sample bottle. If the bottles are the same color, then the soap concentration is sufficient. If the bottles are different colors, then add 2 gallons of Calla® 602 LF for every 100 gallons of tank volume and repeat the test with a new kit.

Download technical data sheet of the Calla® 602LF Indicator Kit below

 

Packaging

Available in a case of 6 kits (009275)

Download technical data sheet of the Calla® 602LF Defoamer below

File Icon

Contact Zip-Chem® Products

Contact Zip-Chem® Products to request Calla® 602LF Indicator Kit and the Calla® 602LF Indicator Kit SDS.

Return To Calla® Webpage