Calla® 800 Military

Return To Calla^® Webpage

Description

Calla^® 800 Military meets specification Mil-PRF-87937D Type II, and is on the Qualified Product List for this specification. Qualification Reference is QPL-87937-10.

Calla^® 800 Military is a highly concentrated and versatile water base cleaner and is an outstanding general aircraft cleaner and exhaust stain remover. It is also excellent for cleaning wheel wells and landing gear without solvent.

Methods of Use

The following recommendations for the cleaning of aircraft, aircraft components, and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

Exterior Fuselage

Tail Sections, Wing Tips, Etc.:

Mix 1 part Calla^® 800 Military with 3 to 20 parts water, depending on the amount of soil; apply by spray or mop; allow a few minutes for penetration before mopping or brushing and rinsing thoroughly.

Exterior Blast Areas

Apply Calla^® 800 Military full strength and allow 20 to 30 minutes dwell time, brush those areas subject to heavy grease build up. Rinse with high pressure hot water with the nozzle as close as possible to the surface to take advantage of the additional agitation of water pressure.

Landing Gear & Wheel Wells

Landing Gear:

Mix 1 part Calla^® 800 Military with 2 parts water; apply by spray or mop; allow a few minutes for penetration before scrubbing heavy deposits; flood rinse with water.

Waterless Cleaning

Dilute Calla^® 800 Military as amount of soil requires in open bucket or barrel. Saturate mop in solution and wring out excess water. Mop the surface thoroughly covering a small area at a time. Rinse with a clean, damp mop.