Return To Cor-Ban® Webpage
White Cor-Ban 23 Aerosol Can With Black Lid

Description

Cor-Ban® 23 is designed to be a long lasting, high penetration, water displacing, corrosion inhibiting compound for use on the following high profile aircraft substrates.

  • Upper Edge Floor Beams
  • Wheel Wells
  • Pressure Deck
  • Center Wing Sections

The finished coating is non-tacky with a light reddish-pink tint. Cor-Ban® 23 offers the fast dry time and thin film of BMS 3-23 and the long lasting corrosion inhibition properties of BMS 3-29 and BMS 3-35.

 

Application of Product

Cor-Ban® 23 can be applied by conventional airless or air-operated spray equipment. Aerosol application is also available. The Cor-Ban® 23 aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit® technical data sheet for more information. All properties represented were achieved with a dry film thickness of range 0.3 - 0.5 mils (7-12 microns). The wet film will self level to achieve the desired dry film thickness when applied to an inclined surface. One aerosol can covers approximately 160 ft² (14.9 m²)and one gallon of bulk material cover approximately 2290 ft² (56.2 m²/liter).

 

Features

  • Detectable Film
  • Fast Drying Non-Tacky Film
  • High Penetration
  • > 3000 Hours Salt Spray
  • < 0.3 Mil (8 microns) Required To Surpass Specification
  • Non-Cracking and Non-Flaking To -65°F (-54°C)
  • Non-Sagging Film
  • Solvent Removable
  • Very Low Dry Film Weight
  • Water Displacing

 

Specifications

Cor-Ban® 23 is on the QPL for BMS 3-23J Ty II Class 2 Grade A & B, BAMS 565-006 Ty V, DHMS C4.12 Ty II Gr 3 & 4, and MEP 10-063.

This product may be used in the place of Airbus CML 15-006. Cor-Ban® 23 conforms to the following specifications:

 

Physical Properties

  • Color: Transparent Reddish-Pink
  • Drying Time: <1 hour
  • Exfoliation: Pass At -65°F (-54°C)
  • Flash Point: 114°F (46°C)
  • Fungal Growth per Fed-STD-810 Method 508.7: 0 (No Microbial Growth)
  • Low Temp Flaking: Pass
  • Non-Volatiles: 42%
  • Operating Temperature: -65°F (-54°C) to 350°F (177°C)
  • Penetration: >4 inches per hours per BMS 3-35
  • Salt Spray Protection: > 3000 hours on aluminum
  • Specific Gravity: 0.88
  • Viscosity: 35-40 cps.
  • Water Displacement: 0% Rust

 

Packaging

Aerosol (008017)

Quarts (010097)

Gallons (009401)

5 Gallon Pail (008015)

55 Gallon Drum (008016)

Special packaging upon request

Download technical data sheet of Cor-Ban® 23 below

File Icon

Contact Zip-Chem® to request Cor-Ban® 23 packaging and the Cor-Ban® 23 SDS.

Return To Cor-Ban® Webpage