Return To Cor-Ban® Webpage
White Cor-Ban 23 Enhanced Dye Aerosol Can With A Black Lid


Cor-Ban® 23 Enhanced Dye is designed to be a long lasting, high penetration, and water displacing corrosion inhibiting compound for use on high profile aircraft substrates, upper edge floor beams, wheel wells, pressure deck, and center wing sections. Cor-Ban® 23 Enhanced Dye offers the fast dry time and thin film as well as inhibition. Cor-Ban® 23 Enhanced Dye has a stronger dye than regular Cor-Ban® 23 so that it can easily be detected visually.


Application of Product

Cor-Ban® 23 Enhanced Dye can be applied by conventional airless or air-operated spray equipment. Aerosol application is also available. The Cor-Ban® 23 Enhanced Dye aerosol can be used in conjunction with the Formit® extentions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit® technical data sheet for more information. All properties represented were achieved with a dry film thickness of range 0.3 - 0.5 mils (7-12 microns). The wet film will self level to achieve the desired dry film thickness when applied to an inclined surface. One aerosol can covers approximately 160 ft² (14.9 m²) and one gallon of bulk material covers approximately 2290 ft² or 2290 ft²/gal (56.2 m²/liter).



  • Water Displacing
  • Non-Sagging Film
  • High Penetration
  • Fast Drying Non-Tacky Film
  • Detectable Film
  • Non-Cracking and Non-Flaking to -65°F (-54°C)
  • Solvent Removable
  • > 3000 Hours Salt Spray
  • Very low dry film weight <0.3 mil (8 microns) required to surpass specification



Cor-Ban® 23 Enhanced Dye is on the QPL for BMS 3-23J Ty II Class 2 Grade A & B and may be used in the place of Airbus CML 15-006. Cor-Ban® 23 Enhanced Dye conforms to the following specifications:


Physical Properties

  • Color: Transparent Reddish-Pink
  • Drying Time: <1 hour
  • Exfoliation: Pass at -65°F (-54°C)
  • Flash Point: 114°F (46°C)
  • Low Temp Flaking: Pass
  • Non-Volatiles: 42%
  • Operating Temperature: -65°F (-54°C) to 350°F (177°C)
  • Penetration: >4 inches per hours per BMS 3-35
  • Salt Spray Protection: >3000 hours on aluminum
  • Specific Gravity: 0.88
  • Viscosity: 35-40 cps.
  • Water Displacement: 0% Rust



Aerosol (011321)

5 Gallon Pail (011209)

Special Packaging Upon Request

Download technical data sheet of Cor-Ban® 23 Enhanced Dye below

File Icon

Contact Zip-Chem® to request Cor-Ban® 23 Enhanced Dye packaging and the Cor-Ban® 23 Enhanced Dye SDS.

Return To Cor-Ban® Webpage