Return To Cor-Ban® Webpage
White Aerosol Spray Can With A Black Lid

Description


Zip-Chem® Cor-Ban® 35 Undyed is designed to be a long lasting, high solids, low volatiles, high penetration, and water displacing corrosion inhibiting compound for use on the following high profile aircraft substrates.


  • Upper Edge Floor Beams
  • Wheel Wells
  • Pressure Deck
  • Center Wing Sections

The finished coating is non-tacky with a light yellow tint. Zip-Chem® Cor-Ban® 35 Undyed offers the fast dry time and thin film with long lasting corrosion inhibition properties.


Application of Product


Zip-Chem® Cor-Ban® 35 Undyed can be applied by conventional airless or air-operated spray equipment. The coating should be applied at 1 - 1½ mils (25-38 microns) wet thickness.


Aerosol application is available.


The Cor-Ban® 35 Undyed aerosol can be used in conjunction with the Formit® extentions to provide targeted spray to areas that are difficult to reach but need to be coated. Please refer to our Formit® technical data sheet for more information.


All properties represented were achieved with a dry film thickness of 0.5 - 0.75 mils (12-19 microns).


One aerosol can covers approximately 95 ft² (8.8 m² ).


Cured Zip-Chem® Cor-Ban® 35 Undyed can be removed with Sur-Prep® 3160, D-5640NS, Zip-Strip 125M, Sur-Prep® 3167, or mineral spirits.


Features


  • Water Displacing
  • Fast Drying Non-Tacky Film
  • High Penetration
  • 2000 Hours of Salt Spray
  • Low VOC
  • Non-Cracking and Flaking to -40°F (-40°C)
  • Solvent Removable
  • High Solids > 51%
  • Non-Sagging Thixotropic Film
  • Very Low Dry Film Weight < 1 mil required to surpass specification

Specifications


Cor-Ban® 35 Undyed is on the QPL for:



Physical Properties


  • Color: Transparent Light Yellow Tint
  • Compatibility Cd, Mg, AI: Pass
  • Drying Time: <1 hour
  • Exfoliation: Pass
  • Flash Point: 115°F
  • Low Temp Flaking: Pass
  • Material VOC: 395 g/L
  • Non-Volatiles: 51% min.
  • Penetration: BMS 3-23F Pass
  • Solvent Type: Aliphatic
  • Specific Gravity: 0.90
  • Water Displacement: 0% Rust

Packaging


Aerosol (006710)

Quarts (101482)

8 oz Brush In Cap (101477)

Gallons (009410)

5 Gallon Pail (006708)

55 Gallon Drum (006709)

Special packaging upon request


Download technical data sheet of Cor-Ban® 35 Undyed by clicking on the TDS button below



Contact Zip-Chem® Products


Contact Zip-Chem® Products to request Cor-Ban® 35 Undyed packaging and the Cor-Ban® 35 Undyed SDS.


Submit An Image, Video, Or Document


Click here to submit an image, video, or document of a Cor-Ban® 35 Undyed inquiry or corrosion challenge that you are facing.


Return To Cor-Ban® Webpage