Zip-Chem^® Jet-Brite^™ 550

Description

Zip-Chem^® Jet-Brite^™ 550 aircraft polish is specially formulated to clean, remove oxidation, and restore luster to aluminum and painted surfaces in a one-step process. It contains no abrasives or corrosives. There is no need to use harsh compounds that can scratch and dull fine finishes. Jet-Brite^™ 550 contains no wax, silicone, or polymers that can cause post operation coating problems.

Application

Apply Jet-Brite^™ 550 to small sections with a soft cotton cloth or buffing wheel. Rub lightly so that the removal of oxide and carbon buildup will be visible. Use a clean and soft cotton cloth or buffing wheel to remove the paste while the cloth or buffing wheel is moist. Buff to a high luster finish. Excellent results can be obtained on leading edges, spinners, windows, galleys, lavatories, hardware, and carbon stained areas. Jet-Brite^™ 550 should be applied over new paint only after the paint has fully cured. Please consult your paint supplier for guidelines on full cure of the paint to be covered with Jet-Brite^™ 550.

Features

Jet-Brite^™ 550 is impervious to fuels, oils, and hydraulic fluids. Jet-Brite^™ 550 will leave no residues or foreign matter on the substrate. Due to Jet-Brite^™ 550's nonabrasive formulation, it can be used safely on bare metal and painted surfaces, fiberglass, plexiglass, and molded plastic. Jet-Brite^™ 550 will impart an oxide resistant finish when properly applied.

Specifications

Jet-Brite^™ 550 conforms with CSD#1 and AMS 1650B Type 2 paste, as well as Boeing D6-17487 Rev L.

Physical Properties

• Color: Light Pink/Tan
• Consistency: Homogeneous Paste
• Flash Point: 220°F Seta Closed Cup
• Odor: Mild Mineral Spirit Odor
• Specific Gravity: 1.09