Return To Cor-Ban® Webpage
White Noxit Aerosol Spray Can With A Black Cap and an Airplane Logo


Noxit® 86 is a heavy duty, water displacing, non-drying, thin film, corrosion preventive compound that is specially formulated for use on highly critical metal surfaces.

Noxit® 86 contains no ozone depleting chemicals.

This material will be effective in contacting corrosion in all areas of the airplane and is an integral part of the corrosion control program.

Application of Product

Noxit® 86 protects cables and interior and exterior aircraft surfaces.

Noxit® 86 can be used for initial protection during shipment and storage and for in-service treatment of critical areas.

When used in conjunction with the Formit®-18-90-FOG or Formit®-18-STD-FOG, Noxit® 86 can form a corrosion inhibiting fog which will coat those hard to reach areas.

One aerosol will cover about 70 ft2 at the recommended thickness.


Noxit® 86 will not harm most paints, plastics, or insulation. This product can also provide light lubrication.

The ability of Noxit® 86 to prevent corrosion and to displace water along with its complete miscibility with lubricating oil and ease of application makes it particularly suited for service use.


Physical Properties

  • Boiling Range: -22 to 375 Deg. F.

  • Evaporation Rate: Faster than ether

  • Flame Extension: Flammable

  • Material V.O.C.: 186 G/L

  • Specific Gravity (H2O=1): 1.1

  • Vapor Density: Heavier than air


Aerosol (002049)

Gallons (008997)

5 Gallon Pail (008998)

55 Gallon Drum (008999)

Special Packaging Upon Request

View technical data sheet of Noxit® 86 by clicking on the TDS button below

Contact Zip-Chem® Products

Contact Zip-Chem® Products to request Noxit® 86 packaging and the Noxit® 86 SDS.

Submit An Image, Video, Or Document

Click here to submit an image, video, or document of a Noxit® 86 inquiry or corrosion challenge that you are facing.

Return To Cor-Ban® Webpage