Return To Aero-Lube Webpage

Description

Zip-Chem® ZC-440 Fluorocarbon Dry Lubricant is a fluorocarbon telomer that is chemically similar to the Teflon* PTFE-fluorocarbon resin. Due to its chemical inertness and ability to withstand temperatures from the cryogenic range up to 240°F (116°C), ZC-440 finds many uses throughout the aircraft. ZC-440 also prevents corrosion on metal substrates and provides a lubricating surface for them. When using this material in bulk form, it must constantly be agitated.

 

Application

The Zip-Chem® ZC-440 fluorocarbon is designed primarily for use as a dry film lubricant or mold release where it is applied to cold or warm surfaces (less than 240°F). It is formulated to provide the highest adhesion possible to the substrate and still provide a good release or lubricating properties. ZC-440 can be applied to slat tracks to prevent corrosion and provide lubrication without the build-up of debris that is typically found if greases and oils are used. ZC-440 is also available in aerosol form as D-5440NS.

 

Features

  • Excellent anti-stick properties
  • Effective release agent for epoxies, polyurethanes, etc
  • Withstands temperatures up to 500°F (260°C) continuously
  • Will not run or stain
  • Excellent dry film lubricant for wood, plastic, rubber, paper, and metal
  • Non-conductive, chemically inert, and non-flammable

 

Physical Properties

  • Density: 2.16 grams/cc
  • Melting Point: 572°F (300°C)
  • Softening Point: 510°F (265°>C)

 

Teflon is a registered trademark of E.I. DuPont Co.

Packaging

Aerosol (002060)

Quarts (009660)

Gallons (007070)

5 Gallon Pail (007071)

55 Gallon Drum (007072)

Special packaging upon request

Download technical data sheet of ZC-440 below

File Icon

Contact Zip-Chem® to request ZC-440 packaging and the ZC-440 SDS.

Return To Aero-Lube Webpage