Description

Zip-Strip^™ 125M was designed specifically for removal of wet, waxy, and/or dry film Corrosion Inhibiting Compounds (CIC’s). The material is water rinseable and is very effective even after a short dwell time. The product is extremely effective on a wide range of aviation soils, such as MoS2 grease, hydraulic fluid, wax, and carbon deposits.

Application of Product

Zip-Strip^™ 125M can be applied by aerosol, airless, air-assist, dipping, or brushing.

The Zip-Strip^™ 125M aerosol can be used in conjunction with the Formit^® extensions to provide targeted spray to areas that may be difficult to reach but need to be cleaned. Please refer to our Formit^® technical data sheet for more information. The material should be applied at a thickness of 2 to 7 mils, depending on the thickness and age of the material to be removed. The material should also be allowed to dwell for 5-10 minutes (10-20 minutes for heavy duty removal) and then pressure sprayed or rinsed off. Do not allow material to dry on the surface. If drying commences, apply a light film of additional Zip-Strip^™ 125M and rinse off.

Specifications

Zip-Strip^™ 125M meets the Boeing D6-17487 and the Airbus AIMS 09-00-002 making it an ideal CIC remover for mixed fleet carriers.

Features

Zip-Strip^™ 125M is a fast acting neutral pH CIC Remover. The components are biodegradable but the contaminants that the cleaner removes may not be. Handle effluent accordingly.

Physical Properties

• Appearance: Clear liquid
• Bulk Density: 7.0 lbs per gallon
• Composite Vapor Pressure: 0.5 mm of Hg @ 25°C
• Flash Point: 127° F PMCC
• Odor: Solvent Odor
• Specific Gravity: 0.84
• Viscosity: 200 cps.
• VOC G/L: 253 grams/liter
• Volatiles: 87% by weight

Packaging

Aerosol (102614)

Gallons (102608)

5 Gallon Pail (102609)

55 Gallon Drum (102610)

Special packaging upon request

Download technical data sheet of Zip-Strip^™ 125M below

Contact Zip-Chem^® to request Zip-Strip^™ 125M packaging and the Zip-Strip^™ 125M SDS.