Applications

Intended for use on:

• Upper edge floor beams
• Wheel wells
• Pressure deck
• Center wing sections

Apply by conventional airless or air-operated spray equipment.

Aerosol application is also available.

The Cor-Ban^® 23 aerosol can be used in conjunction with the Formit^® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated.  Please refer to our Formit^® technical data sheet for more information.  The Cor-Ban^® 23 aerosol can also be used with the Zip-Chem^® Aerosol Trigger Sprayer which is designed for use with any Zip-Chem^® aerosol can.

Refer to the Cor-Ban^® 23 application manual for detailed application instructions. This manual can be obtained by asking your Zip-Chem^® sales rep for a copy of this document.

All properties represented were achieved with a dry film thickness of range 0.3 – 0.5 mils (7-12 microns).

The wet film will self level to achieve the desired dry film thickness when applied to an inclined surface.

One aerosol can covers approximately 160 ft² (14.9 m²).

One gallon (3.8 Liters) of bulk material covers approximately 2290 ft² (56.2 m²/liter)

Store Cor-Ban^® 23 at 40°F to 100°F (4.4°C – 37.8°C) in the original unopened containers.  Keep containers closed when not in use and protect Cor-Ban^® 23 from direct sunlight.