应用

用在已经被腐蚀的地方，防止进一步的腐蚀发生。

用传统的无气或气动喷雾设备施用。

用在未上底漆或表面涂层的起落架设备和硬件上

应用于预先存在的腐蚀上。

The coating can be applied as thin as 1 mil (25 microns) film thickness to achieve the desired corrosion protection.

可使用气雾剂应用

. Cor-Ban^® 22 气雾剂可与 基金会^® 延长，为可能难以到达但需要喷涂的区域提供有针对性的喷涂。请参阅我们的 基金会^® 技术数据表 for more information.  The Cor-Ban^® 22 aerosol can also be used with the Zip-Chem^® 气溶胶触发式喷雾器 which is designed for use with any Zip-Chem^® 气雾剂罐。

All properties represented were achieved with a wet film thickness of 1.0 mils (25 microns).  This wet film thickness can be measured with Zip-Chem^® 's 湿膜测厚仪.

One aerosol can covers approximately 90 ft² (8.3 m^²).

粘贴 Cor-Ban^® 22 可作为 Cor-Ban^® 27L

Refer to the Cor-Ban^® 22 application manual for detailed application instructions. This manual can be obtained by asking your Zip-Chem^® sales rep for a copy of this document.

商店 Cor-Ban^® 22 at 40°F – 100°F (4.4°C – 37.8°C) in the original unopened containers.  Keep containers closed when not in use and protect Cor-Ban^® 22 from direct sunlight.