Applications

Intended for use on:

• Aircraft
• Aircraft components
• Facilities
• Wheel wells
• Landing gears

Cleaning Applications:

Exterior Fuselage (Tail sections, wing tips, etc.): Mix 1 part of Calla^® 800 Commercial with 3 to 20 parts of water (Depending on soil amount).  Apply the mixture by spray or mop and allow a few minutes for it to penetrate before mopping, brushing, and rinsing thoroughly.  For recovery of badly oxidized surfaces, the 1:3 mixture will provide excellent results under most conditions.  Future washing with more diluted mixtures will maintain oxide free and shiny surfaces

Exterior-Blast Areas: If the solvent can be used, mix 1 part of Calla^® 800 Commercial with 5 parts of solvent.  Agitate the mixture briefly with air to form emulsion.  Spray or mop the mixture over the entire area, allow a few minutes for it to penetrate, scrub the surfaces well, and rinse with water.  When the use of the solvent is restricted, apply Calla^® 800 Commercial at full strength and allow 20 to 30 minutes of dwell time.  Areas with heavy grease build up should be sprayed with Calla^® 800 Commercial undiluted and then scrubbed with a brush.  Rinse with high pressure hot water with the nozzle as close to the surface as possible to take advantage of the additional agitation of water pressure.

Landing Gear and Wheel Wells (Landing Gear): Mix 1 part of Calla^® 800 Commercial with 2 parts water, apply the mixture by spray or mop, and allow a few minutes for it to penetrate before scrubbing heavy deposits.