Used for all painted surfaces and bare metals of aircraft.
Apply Jet-Brite™ 550 to small sections with a soft cotton cloth or buffing wheel. Rub lightly so that the removal of oxide and carbon buildup will be visible.
Use a clean and soft cotton cloth or buffing wheel to remove the paste while the cloth or buffing wheel is moist.
Buff to a high luster finish.
Excellent results can be obtained on leading edges, spinners, windows, galleys, lavatories, hardware, and carbon stained areas.
Jet-Brite™ 550 should be applied over new paint only after the paint has fully cured. Please consult your paint supplier for guidelines on full cure of the paint to be covered with Jet-Brite™ 550.