Intended for use on :
- High profile aircraft substrates
- Upper edge floor beams
- Wheel wells
- Pressure deck
- Center wing sections
Apply by conventional airless or air-operated spray equipment.
Aerosol application is also available
The Cor-Ban® 23 Enhanced Dye aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit® technical data sheet for more information.
All properties represented were achieved with a dry film thickness of range 0.3 – 0.5 mils (7-12 microns).
The wet film will self level to achieve the desired dry film thickness when applied to an inclined surface.
One aerosol can covers approximately 160 ft2 (14.9 m2).
One gallon (3.8L) of bulk material covers approximately 2290 ft2 (56.2 m2/liter).