应用

用于清除CIC。

对广泛的航空土壤有效，如MoS₂ 润滑脂、液压油、蜡和碳沉积。

. Zip-Strip^™ 125M 气雾剂可与 基金会^® 延长线，为可能难以到达但需要清洁的区域提供有针对性的喷雾。 请参考我们的 基金会^® 技术数据表 for more information.  The Zip-Strip^™ 125M aerosol can also be used with the Zip-Chem^® 气溶胶触发式喷雾器 which is designed for use with any Zip-Chem^® 气雾剂罐。

申请 Zip-Strip^™ 125M 通过气溶胶、无气、空气辅助、浸渍或刷子。

Apply material at a thickness of 2 to 7 mils (51-178 microns), depending on the thickness and age of the material to be removed.  This thickness can be measured with Zip-Chem^® 's 湿膜测厚仪.  The material should also be allowed to dwell for 30 minutes and then pressure sprayed or rinsed off.

Do not allow material to dry on the surface.  If drying commences, apply a light film of additional Zip-Strip^™ 125M 并冲洗干净。

The components are biodegradable but the contaminants that the cleaner removes may not be.  Handle effluent accordingly.

Zip-Strip^™ 125M 可用于所有门板紧固件

Refer to the Zip-Strip^™ 125M application manual for detailed application instructions. This manual can be obtained by asking your Zip-Chem^® sales rep for a copy of this document.

Zip-Strip^™ 125M should be stored at 40°F to 100°F (4.4°C – 37.8°C) in the original unopened containers.  Keep containers closed when not in use and protect Zip-Strip^™ 125M from direct sunlight.