应用

用于清除CIC。

对广泛的航空土壤有效，如MoS₂ 润滑脂、液压油、蜡和碳沉积。

. Zip-Strip^™ 125M 气雾剂可与 基金会^® 延长线，为可能难以到达但需要清洁的区域提供有针对性的喷雾。 请参考我们的 基金会^® 技术数据表 for more information.  The Zip-Strip^™ 125M aerosol can also be used with the Zip-Chem^® 气溶胶触发式喷雾器 which is designed for use with any Zip-Chem^® 气雾剂罐。

申请 Zip-Strip^™ 125M 通过气溶胶、无气、空气辅助、浸渍或刷子。

Apply material at a thickness of 2 to 7 mils (51-178 microns), depending on the thickness and age of the material to be removed.  This thickness can be measured with Zip-Chem^® 's 湿膜测厚仪.  The material should also be allowed to dwell for 5-10 minutes (10-20 minutes for heavy duty removal) and then pressure sprayed or rinsed off.

Do not allow material to dry on the surface.  If drying commences, apply a light film of additional Zip-Strip^™ 125M 并冲洗干净。

The components are biodegradable but the contaminants that the cleaner removes may not be.  Handle effluent accordingly.

Zip-Strip^™ 125M 可用于所有门板紧固件

Refer to the Zip-Strip^™ 125M application manual for detailed application instructions. This manual can be obtained by asking your Zip-Chem^® sales rep for a copy of this document.

Zip-Strip^™ 125M should be stored at 40°F to 100°F (4.4°C – 37.8°C) in the original unopened containers.  Keep containers closed when not in use and protect Zip-Strip^™ 125M from direct sunlight.