应用

适用于飞机基材，例如

• 上边缘地板梁
• 车轮井
• 压力甲板
• 中心机翼部分
• 机身内部
• 翻板轨道
• 起落架井

申请 Cor-Ban^® 35 by using conventional airless or air-operated spray equipment or by using aerosol

Apply at 1 – 1½ mils (25-38 microns) wet thickness.  This wet thickness can be measured with Zip-Chem^® 's 湿膜测厚仪.

. Cor-Ban^® 35 气雾剂可与 基金会^® 延长线，为可能难以到达但需要喷涂的区域提供有针对性的喷涂。 见我们的 基金会^® 技术数据表 for more information.  The Cor-Ban^® 35 aerosol can also be used with the Zip-Chem^® 气溶胶触发式喷雾器 which is designed for use with any Zip-Chem^® 气雾剂罐。

All properties represented were achieved with a dry film thickness of 0.5-0.75 mils (12-19 microns).

One aerosol can covers approximately 95 ft² (8.8 m²)

1 gallon (3.8 liters) of bulk material covers approximately 1600 ft² (39.3 m² 每升)

Remove cured Cor-Ban^® 35 与 Sur-Prep^® 3167, Sur-Prep^® 3160，或 Zip-Strip^™ 125M.

Refer to the Cor-Ban^® 35 application manual for detailed application instructions. This manual can be obtained by asking your Zip-Chem^® sales rep for a copy of this document.

商店 Cor-Ban^® 35 at 40°F to 100°F (4.4°C – 37.8°C) in the original unopened containers.  Keep containers closed when not in use and protect Cor-Ban^® 35 from direct sunlight.