Applications

Intended for use on:

• Painted and unpainted metal surfaces

Apply Cor-Ban^® 50 by spray, dip, or brush in the temperature range of 50°F to 100°F (10°C to 38°C).

A gallon of this material will cover approximately 800 square feet (74.3 m²) at a film thickness of 1 mil (25 microns) thick.

For areas requiring penetration, pretreat areas with Cor-Ban^® 35 and then cover with Cor-Ban^® 50.

One aerosol of Cor-Ban^® 50 covers approximately 95 ft² (8.8 m²)

The Cor-Ban^® 50 aerosol can be used in conjunction with the Formit^® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit^® technical data sheet for more information.