Intended for use on :
- Painted and unpainted metal surfaces
Apply Cor-Ban® 50 by spray, dip, or brush in the temperature range of 50°F to 100°F (10°C to 38°C).
A gallon of this material will cover approximately 800 square feet (74.3 m²) at a film thickness of 1 mil (25 microns) thick.
For areas requiring penetration, pretreat areas with Cor-Ban® 35 and then cover with Cor-Ban® 50.
One aerosol of Cor-Ban® 50 covers approximately 95 ft2 (8.8 m²)
The Cor-Ban® 50 aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit® technical data sheet for more information.