When used as directed, Calla® 1452 is intended for use on hard, non-porous, and inanimate environmental surfaces, such as:
- glazed ceramic tile
- plastic surfaces
- metal surfaces
- sealed granite
- sealed fiberglass
- stainless steel surfaces
- glazed porcelain
Disinfection: To disinfect inanimate, hard, and non-porous surfaces, add 4 fluid ounces (118 ml) of Calla® 1452 per 1 gallon (3.8L) of water. Apply the solution with a mop, cloth, sponge, hand pump trigger sprayer, or low pressure coarse sprayer. That way, all of the surfaces can be thoroughly coated with water. Allow surfaces to remain wet for 10 minutes.
Mildewstat: To control mold and mildew (such as Aspergillus niger) including the odors they create on pre-cleaned, hard, and non-porous inanimate surfaces, add 4 fluid ounces (118 ml) of Calla® 1452 per 1 gallon (3.8L) of water. Apply the solution with a cloth, mop, sponge, or hand pump trigger sprayer. Completely cover all of the surfaces with water. Allow the surfaces to air dry after covering them with water. Prepare a fresh solution for each use. Repeat application at weekly intervals or when mildew growth appears.
Fungicidal Activity: At the 4 fluid ounces (118 ml) per dilution level, Calla® 1452 is fungicidal against pathogenic fungi, such as Trichophyton Mentagrophytes and Candida Albicans. Apply the solution with a cloth, sponge, or hand pump trigger sprayer to hard and non-porous surfaces. Allow the surface to remain wet for 10 minutes. Remove the excess liquid after 10 minutes. The diluted Calla® 1452 should be applied daily or more frequently if it is used heavily in a facility.
Note: Calla® 1452 and 1452 RTU should not be used on food contact surfaces if food is expected to be served there immediately. If any surface needs to be disinfected prior to food being served there immediately, use AeroDis® 7127.